DAVIES CRAIG LCD EWP & FAN CONTROLLER -12V/24V - 8000
This is an innovative EWP controller that will manage the operation of your chosen EWP by varying the speed of your pump in response to coolant temperature, and manage the control of your electronic thermatic fan. This will eliminate the need for a separate thermal switch. The controller will vary the speed of your EWP is targeting, and lock in the desired temperature. With that said if the target should go over 3 degrees C over the target, the controller will run your radiator fan until the target temp is fully restored. It complies with both 12, and 24 volts. Included in this package is: •A prominent blue liquid crystal display screen. This is also suitable for all 12V And 24V electrical systems with relevant displays. •Genuine thermometer, with coolant and targeted/set temp. displays. •Diagnostic check and warm-up signals. •9 targeted/set coolant temperatures, 60C (140F) to 100C (212F). •Flashing EWP logo signifying water pump is in operation. •Davies Craig Thermatic fan logo, circulating signifying fan in operation. •Flashing high and low voltage regulators. •Low and high temp indicators. •Audible alarm if the coolant temps exceed 100 degrees C, if the coolant exceeds 10 degrees of target, and if the coolant doesn’t exceed 40 degrees within 5 minutes of startup.